Two tree surgeons chip cut branches with an orange towed wood chipper on the drive of a red-brick house in Nottingham

Wood Chipping in Nottingham

We turn piles of branches, brushwood and small trees into wood chips, right there in your garden or on your drive. You can keep the chips as mulch for your borders, or we take everything away and leave the garden clean.

  • Free inspection
  • Local tree surgeons
  • Price upfront
  • 12+ years' experience
  • Pay on completion
  • Fully insured

From a pile of branches to useful wood chips

After a tree removal, a pruning job or a big garden tidy-up, you are often left with a huge pile of branches. It is heavy to move, fills a trailer in no time and is awkward to get rid of. We turn it into wood chips on the spot.

We are experienced tree surgeons with over 12 years of experience in Nottingham and the surrounding areas. Our wood chipper turns branches, brushwood, hedge cuttings and small trees into chips of around 2-5 cm, and a pile that would fill several trailer loads ends up as a fraction of the volume.

The chipper is towed behind our van, so it usually stands on your drive or on the road outside, and we carry the branches out to it. You decide what happens to the chips: we can blow them into a heap or a border for you to use as mulch, or take them all away.

Before we start, you get a written quote. We always clean up after ourselves, and you only pay when the job is finished as agreed.

  • Free inspection

    We come out and look at the amount of wood and the access, with no obligation. Photos of the pile often help us give you a price.

  • Written quote

    You get the price in writing before we start. The price in the quote is the price you pay.

  • Keep the chips or not

    Use the chips as free mulch in your garden, or let us take them away. Wherever possible we recycle or reuse what we take.

  • Fully insured

    We carry all the liability insurance tree work needs, so you and your property are covered while we work.

When is wood chipping a good idea?

Wood chipping is often the quickest and tidiest way to get rid of branches and brushwood, and you get something useful back.

Most of our chipping jobs follow other tree work: a tree removal, a pruning job or a big hedge trim. But we are just as happy to chip a pile you have cut yourself, or brushwood left over after a storm or a garden clearance.

A tree surgeon lifts an armful of pruned branches from a large pile in a Nottingham back garden, with the orange wood chipper parked beyond the side gate
  • A pile that is in the way

    Branches take up a lot of room on the lawn or drive, and they can kill the grass underneath if they lie there for weeks.

  • Far less volume

    A big, airy pile of branches becomes a small heap of chips, so it is easy to use in the garden or to take away.

  • No trips to the tip

    You do not have to cut branches small, bag them and drive load after load to the recycling centre.

  • Better than a bonfire

    Burning garden waste creates smoke that can bother the neighbours, and it wastes good material. Chips can go back into the garden instead.

  • Free mulch

    Chips make a good mulch for beds and borders. It holds moisture in the soil, helps keep weeds down and slowly feeds the soil as it breaks down.

  • Paths and natural areas

    A layer of chips makes a soft, natural surface for garden paths and wilder corners of the garden.

  • After tree work

    Chipping the branches the same day means the garden is cleared when we leave, not days later.

  • After a storm

    Snapped branches and fallen limbs can be cut up and chipped, so you get the garden back quickly.

For a small amount of soft green cuttings, the council garden waste bin or your compost heap may be enough. Nottingham City Council runs a paid garden waste collection, and residents can take garden waste to the recycling centre on Redfield Road. When there is more than a bin or two of branches, chipping is usually the easier choice.

How we turn branches into wood chips

A wood chipper is a powerful machine. Rollers pull the branches in, and a fast-spinning disc or drum with steel knives cuts them into chips, which are blown out through a chute.

Chipping on site
What happensThe branches are turned into chips in your garden or on your drive
VolumeA big pile becomes a small heap of chips
Something useful backYes, free mulch for beds, borders and paths
NoiseThe chipper is loud while it runs, usually for a short time
SuitsMost jobs, from one pile to a whole garden clearance
Taking the branches away whole
What happensThe branches are loaded up and driven away as they are
VolumeBulky and airy, so it takes many loads
Something useful backNo
NoiseLittle noise
SuitsSmall amounts of branches

How the chipping is done

A tree surgeon stands to the side of the infeed hopper and feeds a branch thick end first into an orange wood chipper, with chips blowing into a bulk bag

We park the chipper as close to the branches as we can, on firm, level ground, and point the chute where the chips should go: into a border, onto a heap or into our vehicle. Before we start, we check that the guards are in place and that the stop bar around the infeed hopper works.

Then we feed the branches in from the side of the hopper, thick end first. As soon as the rollers grip a branch, we let go, and the machine pulls it through at an even pace. Thin side shoots go through with the branch, and leafy, bushy material chips well too.

Short offcuts and the last piece of a branch are pushed in with a long push-stick, never by hand. The chips normally come out around 2-5 cm long. Thin, leafy branches give a finer, greener chip, while thicker wood gives coarser, paler chips.

What can and cannot be chipped

A tree surgeon takes a piece of old wire and a painted fence board out of a pile of branches before chipping, with the orange chipper waiting on the drive

We chip all kinds of trees and shrubs: broadleaf trees such as sycamore, birch, oak and fruit trees, conifers such as leylandii, pine and spruce, and hedge cuttings, shrubs and brushwood. Hard woods like oak take a little longer and wear the knives more than soft woods like pine.

Very thick trunks are usually better cut into 30 cm firewood rounds than chipped. We can leave the rounds for you, or take them away.

  • Yes: branches and brushwood

    Branches, twigs and brush from trees, shrubs and hedges, fresh or dry.

  • Yes: small trees and conifers

    Small trees, leylandii and other conifer hedges, cut into lengths we can handle.

  • No: stones, soil and metal

    Stones, soil, nails, wire and other foreign objects damage the knives and can be thrown out of the machine.

  • No: stumps and root balls

    Stumps and roots are full of soil and stones. We remove stumps with a stump grinder instead.

  • No: treated or painted timber

    Old fence panels, treated wood, chipboard and fibreboard should not end up as mulch (RHS). They need to go to the recycling centre.

  • No: Japanese knotweed

    Knotweed is an invasive plant with its own disposal rules, and material containing it may count as controlled waste (gov.uk).

How the job works

From the first phone call to the finished job, you always know what is happening and what it costs.

  1. Get in touch

    Call us or send us an email. Photos of the pile, ideally with something next to it that shows the size, help us understand the job.

  2. Free inspection or a price from photos

    Often we can give you a price from photos. Otherwise we come out for a free inspection with no obligation, and look at the amount and the access.

  3. Written quote

    You get a written quote with the price, what is included and when we can do the job.

  4. We chip the branches

    We set up the chipper, sort out anything that should not go through it, and feed the branches in safely. A normal pile after a pruning job is often done in an hour or two.

  5. Clean-up and payment

    We rake up twigs and chips, sweep the drive and leave the chips where you want them, or take them away. You only pay when the job is finished.

Our goal is that the job is safe, tidy and at a predictable price, and that you are so pleased that you call us the next time you need help with your trees.

Before and after wood chipping

Drag the handle and see the difference. The big pile of cut branches that covered the lawn is gone. All that is left is a small, neat heap of chips, ready to spread on the borders.

After: the branches have been chipped and the lawn is clear, with a small neat heap of wood chips by the border
Before: a big pile of cut branches covers the middle of a lawn in a Nottingham back garden
BeforeAfter

How to get ready before we arrive

You do not have to do much, but a few small things make the job quicker, and that keeps the price down.

  • Make room for the chipper

    The chipper is towed behind our van. Keep the drive clear, or tell us where we can park on the road outside.

  • Show us the way through

    We carry the branches to the chipper, so a side gate or a path from the back garden to the front makes the job much quicker. Steps and narrow passages are fine, but tell us about them.

  • Pile the branches up

    If you are cutting the branches yourself, stack them in one or a few piles, with the thick ends pointing the same way, as close to the drive as possible.

  • Keep the piles clean

    Leave out stones, soil, wire, nails, plastic and old timber. They can damage the knives.

  • Decide where the chips go

    If you want to keep the chips, tell us where you want them: on a heap, in a border or along a path.

  • Tell your neighbours

    A chipper is noisy while it runs. It is a kind idea to let your neighbours know when we are coming.

How much does wood chipping cost in Nottingham?

Most of our wood chipping jobs cost between £100 and £800. The price depends mostly on how much wood there is, what kind of wood it is and how easily we can get the chipper to it.

Type & quantityCost in £
50 cubic feet branches100 - 300
100 cubic feet branches200 - 500
7 metre pine200 - 400
15 metre pine400 - 600
7 metre oak300 - 500
15 metre oak500 - 800
Prices updated as of November 2026

The prices are a guide. 50 cubic feet is about 1.4 cubic metres of loose branches. This is what affects the price of your job:

  • Amount

    The more branches, trees and brushwood there are, the longer the job takes.

  • Type of wood

    Hard woods such as oak, maple and birch are denser than soft woods such as pine and spruce. They take longer and wear the chipper more.

  • Access

    If we can park close to the pile, the job is quick. Long carries from a back garden, steps and narrow passages take longer.

  • The chips

    Whether you keep the chips, or want us to load them up and take them away.

If we chip the branches as part of a tree removal or pruning job, it is all agreed in the same quote. You can find more details on our page about wood chipping prices in Nottingham.

Keep the chips, or let us take them away

The chips are yours if you want them. We agree in the quote what happens to them, so you know exactly what you get.

Some people keep all the chips, others keep a few barrowloads for the borders and let us take the rest. Tell us what you want, and we will do it.

A tree surgeon rakes fresh wood chips over a shrub border, leaving a clear gap around the base of a small tree, in a Nottingham back garden
  • Chips on a heap

    We blow the chips onto a neat heap in a corner of the garden, so you can spread them when it suits you.

  • Chips straight onto the border

    Where the chute can reach, we blow the chips straight into a border, and rake them out.

  • Some of each

    Keep as much as you need for the borders and paths, and we take the rest away.

  • Taking them away

    We load up the chips and take them away. Wherever possible we recycle or reuse them.

  • Firewood from the trunk

    Thicker wood that is not worth chipping can be cut into 30 cm rounds, so you can split and season it for your stove or fire.

  • Clean-up

    Whatever you choose, we rake up twigs and chips and sweep the drive, so the garden is tidy when we leave.

Whoever takes your garden waste away must be allowed to

Branches and chips from your garden count as household waste. If you give household waste to someone else, you must make sure they are legally allowed to take it, and you could be fined if they are not (gov.uk).

How to use wood chips in your garden

Chipped branches make a useful, free mulch. Used the right way, it holds moisture in the soil, helps keep weeds down and protects the soil surface from heavy rain.

The Royal Horticultural Society says chips from both broadleaf trees and conifers make an excellent mulch. They break down slowly, so they last a long time. Here is how to get the best from them:

  • Lay it thick

    Wood chips do not pack down like compost, so you can spread them about 8-12 cm deep on beds and borders.

  • Keep a gap around trunks

    Leave an 8-10 cm gap around the base of trees and shrubs. Chips piled against a trunk keep it damp and can encourage disease.

  • Fresh chips on the surface are fine

    As a surface mulch, fresh chips rarely cause any shortage of nutrients for established plants. Just do not dig them into the soil, because that can lock up nitrogen for up to two years.

  • Careful with new plantings

    Avoid fresh broadleaf chips on newly planted beds, and let conifer chips such as leylandii age first. A heap left to weather for three to four months can then be used around new plants too.

  • Not on vegetable beds

    Keep woody mulch away from annual beds, vegetable beds and soft fruit, where the roots are shallow.

  • Not from diseased wood

    Do not use chips from the base of trees with honey fungus or Phytophthora root rot, or from wood with verticillium wilt or coral spot. Tell us if a tree was diseased, and we take those chips away.

Mulch works best spread on moist soil, and on beds in early spring before the weeds get going. Avoid spreading it over herbaceous perennials and small bulbs. On garden paths, chips make a soft surface that you top up now and then.

What we chip most often in Nottingham

Every garden is different, but some jobs come up again and again in Nottingham and the towns around it.

  • Leylandii hedge cuttings

    Leylandii hedges grow fast and leave big piles of cuttings when they are cut back or trimmed. The chips are fine on paths, but let them age before you use them around young plants.

  • Sycamore

    Sycamores grow fast and seed themselves everywhere, so there is often plenty to chip after pruning or removal. If a sycamore had sooty bark disease, tell us, because the spores can harm your lungs and the wood needs extra care.

  • Birch and fruit trees

    Birch and old apple, pear and plum trees chip well and give a good, clean mulch for established borders.

  • Laurel and other evergreen shrubs

    Laurel chips well. When shredded, its leaves release tiny amounts of gas, but the RHS says a harmful dose is highly unlikely, and advises shredding it outdoors, which is where we always chip.

  • Storm-damaged branches

    Snapped branches and fallen limbs after strong winds are cut into lengths and chipped, so the garden is cleared quickly.

  • Garden and plot clearances

    When we clear an overgrown garden or plot, chipping the brush on site cuts the number of loads right down. Read more about site clearance.

Ash trees with ash dieback are a common sight in the area too. We can remove them and chip the branches; see our tree removal page for more about ash dieback.

Safety always comes first

A wood chipper pulls in whatever its rollers grip, and it does it fast. That is why we follow the same safety rules on every job.

Only people who are trained and competent should use machinery like wood chippers (HSE). Everyone who works for us is trained and certified, and we follow the industry safety guide for wood chippers (FISA 604), which is based on earlier HSE guidance.

Two tree surgeons check the stop bar and the empty infeed hopper of an orange wood chipper before they start chipping
  • Checks before we start

    We check that the guards are in place, that the infeed hopper is empty and that the stop bar around the hopper stops the rollers straight away.

  • Feeding from the side

    We stand to one side of the hopper, not in front of it, and let go of each branch as soon as the rollers grip it.

  • Never a hand in the hopper

    No hands or feet go into the hopper while the machine runs. Short pieces go in with a push-stick at least 1.5 m long.

  • The right protection

    Helmet, mesh visor, ear defenders, close-fitting gloves, boots with good grip and clothing with nothing loose to catch on a branch.

  • Hearing protection

    Wood chippers are among the noisy machines in tree work, so we always wear ear defenders while the chipper runs (HSE).

  • Chips kept under control

    We point the chute so that chips do not hit people, cars, windows or the road, and we keep children and pets well away.

We carry all the liability insurance tree work needs, so you and your property are covered while we work.

Rules worth knowing about

Chipping branches does not need permission from anyone. But the tree work that creates the branches might, and there are rules about getting rid of garden waste.

  • Tree Preservation Orders

    If a tree has a Tree Preservation Order, you need the council's consent before any work on it. Cutting down or damaging a protected tree without consent can lead to a large fine (Town and Country Planning Act 1990, s210). We check this before we cut.

  • Conservation areas

    In a conservation area you must give the council six weeks' notice before cutting or removing a tree with a trunk over 75 mm across at 1.5 m height (gov.uk).

  • Nesting birds

    It is an offence to damage an active bird's nest (Wildlife and Countryside Act 1981). We check trees and hedges before we cut them in spring and summer, and we look through old brush piles before chipping them, because birds and hedgehogs like to shelter in them.

  • Bonfires

    No law bans garden bonfires, but smoke that becomes a nuisance or drifts across a road can lead to action or a fine (gov.uk). Nottingham City Council does not allow bonfires lit by builders or tradesmen.

  • Your duty of care for waste

    If someone takes your garden waste away, you must make sure they are allowed to take it (gov.uk).

  • Your neighbour's branches

    You may cut back branches that hang over your boundary, but only up to the boundary (gov.uk). The RHS says the cuttings should be offered back to the tree owner, so agree what happens to them first.

Not sure what applies to your trees? Read our overview of the rules for tree work in Nottingham, or ask us on the free inspection.

When is the best time for wood chipping?

We chip all year round. The timing is usually set by the tree or hedge work that creates the branches.

  • Autumn and winter

    A lot of pruning and tree removal is done in the colder months, outside the main nesting season, so there is often plenty to chip.

  • Spring

    A good time to spread the chips: the RHS advises mulching beds in early spring, before annual weeds get established.

  • Summer

    Hedge-trimming season. The RSPB advises avoiding hedge and tree cutting from March to August where possible, so we always check for nests first.

  • After a storm

    Fallen and snapped branches can be cut up and chipped whenever they come down.

Chips can be spread at any time of year, but avoid laying them on dry soil. If you are not ready to use them, a heap in the corner of the garden keeps well and ages nicely for later.

Wood chipping across Nottingham

We chip branches all over Nottingham, from the city centre, Sherwood and Mapperley to Wollaton, Bulwell and Sneinton, and in the towns around the city.

Read more about our tree surgeons in Arnold, Carlton, Gedling, Burton Joyce, West Bridgford, Edwalton, Wilford, Clifton, Beeston, Stapleford, Trowell, Sandiacre, Ilkeston, Kimberley, Nuthall and Long Eaton. If you live somewhere else nearby, just get in touch.

See what wood chipping costs on our page about wood chipping prices in Nottingham. You can find more information about wood chipping in Nottingham on our Google page.

Wood chipping questions and answers

Can't find the answer you are looking for? Call us on 074 1863 2440 and we will help you. Questions about cost are answered on our wood chipping prices page.

What is wood chipping?

Wood chipping means putting branches, brushwood, hedge cuttings and small trees through a wood chipper, which cuts them into small chips. A big, bulky pile of branches becomes a small heap of chips that is easy to take away or to use in the garden as mulch. In Nottingham we usually chip the branches on site, straight after a tree removal, a pruning job or a hedge trim.

What can be put through a wood chipper?

Almost any woody garden material can be chipped: branches and twigs from trees and shrubs, hedge cuttings, small trees, conifers such as leylandii, and brushwood after a storm or a garden clearance. Fresh and dry wood both chip well. Hard woods such as oak take a little longer than soft woods such as pine. Very thick trunks are usually better cut into 30 cm firewood rounds.

What can't be put through a wood chipper?

Stones, soil, nails, wire, plastic and other foreign objects must never go through a chipper, because they damage the knives and can be thrown out. We do not chip stumps or root balls, or treated or painted timber, fence panels and chipboard, which should not end up as mulch. Japanese knotweed has its own disposal rules (gov.uk), so we do not chip it.

Can I keep the wood chips?

Yes, the chips are yours if you want them. We can blow them onto a neat heap, straight into a border where the chute reaches, or along a path. If you only want some, keep what you need and we take the rest away. Wherever possible we recycle or reuse the chips we take. We agree it all in the written quote.

What can I use wood chips for?

Wood chips make a good mulch for beds, borders and around trees and shrubs. The RHS says they hold moisture in the soil, help suppress weeds and protect the soil from heavy rain, and they break down slowly, so they last a long time. Chips also make a soft, natural surface for garden paths and wilder areas of the garden.

How thick should a wood chip mulch be?

Spread wood chips about 8-12 cm deep on beds and borders. Chips do not pack down like compost, so they can go on thicker than garden compost or manure. Leave an 8-10 cm gap around the base of trees and shrubs, because chips piled against a trunk keep it damp and can encourage disease, and do not cover herbaceous perennials or small bulbs (RHS).

Will fresh wood chips take nitrogen from my plants?

Not when they are used as a mulch on top of the soil: the RHS says there is little evidence that woody mulches cause nutrient shortages for established plants. Digging chips into the soil is different and can lock up nitrogen for up to two years. Avoid woody mulch on vegetable beds, annual beds and soft fruit, and avoid fresh broadleaf chips on newly planted beds.

Is wood chipping better than a bonfire?

Usually, yes: chipping is quick, creates no smoke and gives you a useful mulch back. A garden bonfire is not banned, but smoke that becomes a nuisance or drifts across a road can lead to action or a fine (gov.uk). Nottingham City Council suggests composting or the garden waste bin instead, and does not allow bonfires lit by builders or tradesmen.

Can I take the branches to the tip myself?

Yes, Nottingham City residents can take garden waste to the recycling centre on Redfield Road, and the council also runs a paid garden waste collection. For a big pile of branches, though, that means cutting them small, bagging them and making many trips. When there is more than a bin or two of branches, chipping on site is usually the easier choice.

How long does wood chipping take?

A normal pile of branches after a pruning job or a smaller tree removal is often chipped in an hour or two. Large amounts, for example after a garden clearance or several tree removals, can take most of a day, and long carries from a back garden make it take longer. You get a clear idea of the time in the written quote.

How thick a branch can you chip?

Branches, brushwood and small trees go through our chipper without trouble; the exact limit depends on the machine, and we check the size of the wood when we look at the job. Trunks and very thick limbs are usually better cut into 30 cm firewood rounds than chipped. We can leave the rounds for you to split and season, or take them away with the chips.

Can you chip hedge cuttings and leylandii?

Yes, hedge cuttings, leylandii and other conifers chip well, often together with branches from trees. We often chip the cuttings in the same visit as a hedge trim, so the garden is cleared the same day. Conifer chips are fine on paths, but the RHS advises letting them age for a few months before you use them around young plants.

Can laurel be put through a wood chipper?

Yes, laurel chips well. When cherry laurel is shredded, its leaves release tiny amounts of gas, but the RHS says a harmful dose is highly unlikely and advises shredding it outdoors, which is where we always chip. We often chip laurel in the same visit as a hedge trim or a hedge removal, so the garden is cleared the same day.

Can I use chips from a diseased tree?

Usually yes, as a surface mulch, but with some exceptions. The RHS recommends not using wood from the base of trees with honey fungus or Phytophthora root rot, or wood with diseases such as verticillium wilt or coral spot. Never dig chips from diseased wood into the soil. Tell us if a tree was diseased, and we take those chips away instead of leaving them.

How much is left after chipping?

Much less than you might expect: a big, airy pile of branches is mostly air, so once it is chipped it becomes a small heap that is a fraction of the size. How much is left depends on how leafy and twiggy the branches are. The heap is easy to spread on the borders, or for us to load up and take away.

How big are wood chips?

Our wood chips are normally around 2-5 cm long. Thin, leafy branches give a finer, greener chip, while thicker wood gives coarser, paler chips. Both work well as mulch on beds and borders and as a soft, natural surface for garden paths around Nottingham homes.

Where does the wood chipper need to stand?

Our chipper is towed behind our van, so it usually stands on your drive or on the road outside, on firm, level ground. It does not need to get into the back garden: we carry the branches out to it, through a side gate, along a path or through a passage. Tell us about steps or narrow passages, and where we can park.

Can you chip branches from a back garden with no vehicle access?

Yes. Many Nottingham terraces and semis have no vehicle access to the back garden, so we carry the branches through a side gate or a passage and chip them at the front. It takes a little longer than when the chipper can stand next to the pile, so tell us about steps and narrow passages when you get in touch.

How noisy is a wood chipper?

A wood chipper is loud while it runs: HSE names wood chippers among the noisy machines in tree work, so our team always wears ear defenders. Most jobs are done in a short time, and the chipper only runs while we are feeding it. We work during the day, and it is a kind idea to let your neighbours know when we are coming.

Can you chip branches I have cut myself?

Yes. We are happy to chip branches and brushwood whoever cut them, whether it is your own pruning, a hedge you have trimmed or a tree that came down in a storm. Send us a photo of the pile, ideally with something next to it that shows the size, and we can often quote for the job in Nottingham without a visit.

Do I need to pile the branches up before you come?

No, but it helps. If you have cut the branches yourself, stacking them in one or a few piles, with the thick ends pointing the same way and as close to the drive as possible, makes the job quicker. Keep stones, soil, wire, plastic and old timber out of the piles, because they can damage the chipper.

Can you chip branches that have been lying for a while?

Yes, branches that have dried out for a few weeks or months chip without any problem, although very dry wood gives finer chips and more dust. Branches mixed with soil, stones, wire or other rubbish need sorting first, because those things damage the knives. We also look through old brush piles before chipping, because birds and hedgehogs like to shelter in them.

Is it safe to use a wood chipper myself?

Only if you are trained in how to use it. The industry guide (FISA 604) says to stand to one side of the infeed, let go as soon as the rollers grip, use a push-stick at least 1.5 m long for short pieces, and never put hands or feet into the hopper while it runs. Wear eye and hearing protection, close-fitting gloves and clothing with nothing loose.

Can you chip tree stumps and roots?

No, stumps and roots are full of soil and stones, which would damage the knives of a wood chipper. Instead we remove stumps with a stump grinder, which turns the stump and the top of the main roots into chips below ground level. We can chip the branches and grind the stump in the same visit after a tree removal.

How does a wood chipper work?

In a wood chipper, feed rollers grip the branches and pull them in against a fast-spinning disc or drum fitted with steel knives, which cut the wood into chips. The chips are blown out through a chute into a heap, a border or a vehicle. A stop bar around the infeed hopper stops the rollers straight away if it is pushed.

Contact

Book a free inspection

Tell us briefly what you need and we will get in touch to arrange a time. Photos of the branches help us understand the job.

Free inspection

No obligation.